Ohio University

Search within:

David Koonce

David Koonce
Associate Professor Associate Dean for Research and Graduate Education Associate Dean for Graduate College Associate Vice President of Research
Stocker Center 166A
Dean's Office
Industrial and Systems Engineering

Research Interests: data integration, data mining, data visualization, cost estimation

All Degrees Earned: Ph.D., Engineering Science, Louisiana State University, 1993; M.S., Industrial Engineering, Louisiana State University, 1990; B.S., Industrial Engineering, Louisiana State University, 1988

Journal Article, Academic Journal (9)

  • Koonce, D., Sormaz, D. (2019). Metrics to gauge the success of a manufacturing ontology. Procedia Manufacturing; 38: 1678-1682.
  • Matta, V., Koonce, D., Jeyaraj, A. (2011). Initiation, Experimentation, Implementation of Innovations: The Case for Radio Frequency Identification Systems. 2. International Journal of Information Management; 32: 164-174.
  • Weckman, G., Ganduri, C., Koonce, D. (2008). A Neural Network Job-Shop Scheduler Based on Knowledge Extraction from a Genetic Algorithm. 2. Journal of Intelligent Manufacturing; 19: 191-201.
  • Koonce, D., Gandhi, R., Nambiar, A., Judd, R. (2007). Identifying and Removing Error in Hierarchical Cost Estimates. International Journal of Production Economics; vol. 109(1-2): 41-52.
  • Koonce, D., Judd, R., Sormaz, D., Masel, D. (2003). A Hierarchical Cost Estimation Tool. Computers in Industry; 50: 293-302.
  • Koonce, D., Judd, R. (2001). A Visual Modeling Language for EXPRESS Schemata. 5. International Journal of Computer Integrated Manufacturing; 14: 457-472.
  • Dhamija, D., Koonce, D., Judd, R. (1997). Development of a Unified Data Meta-Model for CAD-CAPP-MRP-NC Verification Integration. 1-2. Computers and Industrial Engineering; 33: 19-22.
  • Koonce, D., Judd, R., Parks, C. (1996). Manufacturing Systems Engineering and Design: An Intelligent, Multimodel, Integration Architecture. 6. International Journal on Computer Integration; 9: 443-453.
  • Parks, C., Koonce, D., Rabelo, L., Judd, R., Sauter, J. (1994). Model-Based Manufacturing Integration: A Paradigm for Virtual Manufacturing Systems Engineering. 1-4. Computers in Industrial Engineering; 27: 357-360.

Book, Chapter in Scholarly Book (1)

  • Anderson, C., Mattley, C., Conley, V., Koonce, D. (2014). Community Colleges as Gendered Organizations: Understanding Workplace Power and Women in STEM through a Gendered Organizational Justice Lens. Bingley BD16 1WA: Emerald Group Publishing Limited; 19: 22.

Conference Proceeding (52)

  • Ganduri, C., Koonce, D., Sormaz, D. Cell Formation Based on Dimensionality Reduction of the Part-Machine Incidence Matrix. Proceedings of the Third International Conference on Group Technology / Cellular Manufacturing.
  • Koonce, D., Sormaz, D. (2019). Metrics to Gauge the Success of a Manufacturing Ontology. Limerick: 29th International Conference on Flexible Automation and Intelligent Manufacturing FAIM2019.
  • Koonce, D. (2011). A Preliminary Analysis of business Processes in RFID Implementation. ICIS 2010.
  • Koonce, D. (2011). An Analysis of Female STEM Faculty at Public Two-Year Institutions. ASEE 2011.
  • Koonce, D., Conley, V., Hening, D., Anderson, C. (2011). An Analysis of Female STEM Faculty at Public Two-Year Institutions. Vancouver: American Society for Engineering Education; http://www.asee.org/papers-and-publications/papers.
  • Matta, V., Koonce, D., Sarkar, A. (2011). Analysis of Business Processes in RFID Implementations. Athens.
  • Koonce, D. (2011). Community Colleges as Gendered Organizations: Understanding Workplace Power and Women in STEM through a Gendered Organizational Justice Lens. ASA 2010.
  • Koonce, D. (2011). Satisfaction of Female Faculty at Public Two-Year Institutions. ASEE 2011.
  • Koonce, D., Anderson, C., Conley, V., Mattley, C. (2011). Satisfaction of Female Faculty at Public Two-Year Institutions. Vancouver: American Society for Engineering Education; http://www.asee.org/papers-and-publications/papers.
  • Koonce, D., Conley, V., Jie, Z., Anderson, C. (2011). STEM Education vs. Occupation: a Supply and Demand Analysis. Proceedings of the 2011 Industrial Engineering Research Conference.
  • Koonce, D. (2011). What is STEM?. ASEE 2011.
  • Koonce, D., Zhou, J., Conley, V., Hening, D., Anderson, C. (2011). What is STEM?. Vancouver: American Society for Engineering Education; http://www.asee.org/papers-and-publications/papers.
  • Koonce, D., Conley, V., Anderson, C., Hening, D. (2010). Career Success for Female STEM Faculty at Public Two-Year Institutions. Louisville, KY: Proceedings of the 2010 American Society for Engineering Education.
  • Koonce, D., Matta, V. (2010). Refining the Functional Breakdown of RFID Applications.
  • Koonce, D., Bharti, H., Matta, V. (2010). Refining the Functional Breakdown of RFID Applications. Cancun: 2010 Industrial Engineering Research Conference.
  • Koonce, D., Matta, V., Bharti, H. (2009). Analyzing the Semantic Breakdown of Functionality in RFID Applications. Proceedings of the 2009 Industrial Engineering Research Conference.
  • Koonce, D., Shah, N. (2008). A Classification For Maps Between WBS Elements To Support Automated Hierarchical Cost Estimation. Proceedings of the 5th International Conference on Digital Enterprise Technology.
  • Roth, S., Koonce, D. (2008). A Model to Predict Ohio University Student Retention from Admissions and Involvement Data. Proceedings of the 2008 Industrial Engineering Research Conference.
  • Koonce, D., Ganduri, C., Sormaz, D. (2006). A Cell Formation Algorithm Based on Dimensionality Reduction of the Part-Machine Incidence Matrix. Groningen, The Netherlands: 3rd National Conference on Group Technology/Cellular Manufacturing 2006.
  • Koonce, D., Matta, V. (2005). Resistance In Adoption Of Radio Frequency Identification Systems In The Supply Chain Industry. Proceedings of the IIE 2005 Annual Conference.
  • Matta, V., Koonce, D. (2005). Resistance in Adoption of Radio Frequency Identification Systems in the Supply Chain Industry.
  • Koonce, D., Ghandi, R., Judd, R. (2005). Calibration and Algorithmic Approach. Fort Worth, TX: 2005 Conference on Next Generation Concurrent Engineering.
  • Sormaz, D., Koonce, D., Judd, R. (2005). Manufacturing Knowledge Capture for FIPER Cost Estimation Tool. Fort Worth, TX: 2005 Conference on Next Generation Concurrent Engineering.
  • Ganduri, C., Weckman, G., Koonce, D. (2004). A Reactive Neural Network that Identifies Schedule Fitness in a Job-Shop Environment. Houston, TX: Proceedings of the IIE 2004 Annual Conference.
  • Koonce, D., Gandhi, S. (2004). Applying inductive logic programming for knowledge discovery in genetic algorithm's solutions to a job shop schedule. Proceedings of the IIE 2004 Annual Conference.
  • Koonce, D., Sormaz, D., Masel, D., Judd, R. (2004). Cost Estimation Methodology using Hybrid Hierarchical Approach. Proceedings of the IIE 2004 Annual Conference.
  • Shah, N., Koonce, D. (2004). Using Distributed Genetic Algorithms For Solving Job Shop Scheduling Problems. Proceedings of the IIE 2004 Annual Conference.
  • Koonce, D., Sormaz, D., Masel, D., Judd, R. (2004). Cost Estimation Methodology using Hybrid Hierarchical Approach. Houston, Texas: 13th Industrial Engnieering Research Conference IERC 2004.
  • Sormaz, D., Judd, R., Koonce, D., Nambiar, A. (2004). Development of Cost Library for Manufacturing Processes in Cost Estimation Tool. Houston, Texas: 13th Industrial Engineering Reseawrch Conference IERC-2004.
  • Koonce, D., Mehta, A. (2003). Refined Rule Induction for Job-Shop Scheduling. Proceedings for IIE 2003 Annual Conference.
  • Koonce, D., Chenhansa, S. (2002). An Approach In Applying XML To Logistics Communication. Proceedings for IIE 2002 Annual Conference.
  • Chinchilla, R., Hoag, J., Koonce, D., Kruse, H., Osterman, S., Wang, Y. (2002). Characterization of Internet Traffic and User Classification: Foundations for the Next Generation of Network Emulation. Proceedings of the The 10th International Conference on Telecommunication Systems, Modeling and Analysis.
  • Kantak, S., Koonce, D. (2002). Improving The Data Mining Exploration Technique For Job Shop Schedules By Using Multiple Data Sets. Proceedings of the 6th International Conference on Engineering Design and Automation; 31-36.
  • Koonce, D., Trasi, A., Judd, R. (2001). Cost Estimation with Feature Recognition. Las Vegas, NV: 5th International Conference on Engineering Design and Automation; 208-222.
  • Trasi, A., Koonce, D., Judd, R. (2001). Cost Estimation with Feature Recognition. Proceedings of the 5th International Conference on Engineering Design and Automation; 208-222.
  • Koonce, D., Judd, R., Keyser, T., VerDuin, B., Bailey, M., Kolonay, R., Wujek, B., Cawley, N., Benjamin, M. (2000). A Federated Intelligent Product Environment (FIPER). Proceedings of The 4th International Conference on Engineering Design and Automation; 106-109.
  • Koonce, D., Judd, R., Keyser, T., VerDuin, B., Bailey, M., Kolonay, R., Wujek, B., Cawley, N., Benejamin, M. (2000). A Federated Intelligent Product Environment (FIPER). Orlando, FL: 4th International Conference on Engineering Design and Automation; 106-109.
  • Koonce, D., Judd, R., Keyser, T. (2000). A Cost Estimation Tool Integrated into FIPER. Melbourne, Australia: 4th International Conference on Design of Information Infrastructure Systems for Manufacturing.
  • Koonce, D., Judd, R., Majeti, V. (1999). An Integration of Common Manufacturing Design Tools Using the IMDE Architecture. Proceedings of the 3rd International Conference on Engineering Design and Automation.
  • Koonce, D., Dhamija, D., Judd, R. (1999). Using Meta-Data to Integrate Cost Estimation into the Manufacturing Design Process. Proceedings of 1999 NSF Design and Manufacturing Grantees Conference.
  • Koonce, D., Judd, R., Nie, C. (1999). VQL a Visual Query Language for EXPRESS. Proceedings of the 1999 Industrial Engineering Research Conference.
  • Judd, R., Nie, C., Koonce, D. (1999). VQL, A Visual Query Language for STEP Data Files. Proceedings of the 3rdInternational Conference on Engineering Design and Automation.
  • Koonce, D., Judd, R., Majeti, V. (1999). An Integration of Common Manufacturing Design Tools using the IMDE Architecture. Vancouver, BC: 3rd International Conference on Engineering Design and Automation; 746-752.
  • Judd, R., Nie, C., Koonce, D. (1999). VQL, A Visual Query Language for STEP Data Files. Vancouver, BC: 3rd International Conference on Engineering Design and Automation; 545-552.
  • Koonce, D., Judd, R., Nie, C. (1999). VQL, A Visual Query Language for EXPRESS. Phoenix, AZ: 1999 Industrial Engineering Research Conference.
  • Koonce, D., Dhamija, D., Judd, R. (1999). Using Meta-Date to Integrate Cost Estimation into the Manufacturing Design Process. Long Beach, CA: 1999 NSF Design and Manufacturing Grantees Conference.
  • Koonce, D., Judd, R. (1998). An EXPRESS Based Integration of CIM Tools. Maui, HI: 2nd International Conference on Engineering Design and Automation.
  • Dhamija, D., Koonce, D., Judd, R. (1998). Consistency Issues in Manufacturing Data Integration. Maui, HI: 2nd International Cnoference on Engineering Design and Automation.
  • Han, J., Sormaz, D., Koonce, D., Parks, C. (1998). Formation of Machine and Part Cells wtih Consideration of Alternative Process Plans. Maui, Hawaii: Engineering Design and Automation Conference, EDA 1998.
  • Judd, R., Dhamija, D., Koonce, D. (1998). The Integration of Data from Multiple Heterogeneous Manufacturing Software Systems. 7th Industrial Engineering Research Conference.
  • Koonce, D., Dhamija, D., Judd, R. (1997). An Integrated Model for Manufacturing Information Exchange. 6th Industrial Engineering Research Conference; 531-536.
  • Parks, C., Koonce, D., Judd, R. (1995). Model Based Engineering Software Systems Integration. Minneapolis, MN: 1996 Industrial Engineering Reseasrch conference; 742-757.

Book, Chapter in Non-Scholarly Book (1)

  • Judd, R., Parks, C., Koonce, D. (1998). Manufacturing systems Modeling with Integrated Design Models. Concurrent Design of Product, Manufacturing Processes and Systems.

Conference, Poster (1)

  • Matta, V., Koonce, D. (2009). Refining the Semantic Model of Functionality of RFID Systems.

Technical Report (1)

  • Judd, R., Sormaz, D., Koonce, D., Zhang, W. (2003). Cost Elements Version 1.0 User Manual FIPER Technical Report. Ohio University.