Skip to: Main Content Search Navigation Secondary Navigation

Gregory Kremer

Robe Professor, Department Chair
Mechanical Engineering, Ohio Coal Research Center
Stocker Center 253
kremer@ohio.edu
Phone: 740.593.1561

http://www.ohio.edu/people/kremer/

Greg Kremer began his career as a mechanical design engineer for General Electric Aircraft Engines (1988-1993) before pursuing his advanced degrees. He joined Ohio University in 1998, where he has been chair of the Department of Mechanical Engineering since 2006 and teaches the program’s senior design capstone, "Designing to Make a Difference." Kremer, selected as a Carnegie Scholar for 2005-2006, participates in the teaching of learning with such projects as developing and assessing student achievement of professional skills outcomes — ABET accreditation board outcomes related to teamwork, communication, global/societal impact, ethics, lifelong learning, contemporary issues, and others. He is the department’s organizer for assessment and continuous improvement. Kremer is also advisor for the student chapter of the Society of Automotive Engineers, and other vehicle-related projects.


Research Interests: energy and the environment, including alternative methods of power production and clean coal technologies; advanced automotive technologies, including alternative fuels, fuel cell vehicles and hybrid-electric vehicles; design of mechanical systems, including total life-cycle design, design creativity and decision methods

All Degrees Earned: Ph.D., Mechanical Engineering, University of Cincinnati, 1998; M.S., Mechanical Engineering, University of Cincinnati, 1995; B.S., Mechanical Engineering, Rose-Hulman Institute of Technology, 1989

Publications:

  • (book chapter) Kremer, G.G. "Designing to Make A Difference," included in the book Connected Science, Ferrett, T. and Geelan, D. editors. 2012.
  • Bayless, D.J., Kremer, G., Vis, M., Stuart, B., Shi, L., Cuello, J., Ono, E., “Photosynthetic CO2 Mitigation using a Novel Membrane-based Photobioreactor,” Journal of Environmental Engineering and Management, Vol. 16, No. 4, pp. 209-215, April 2006.
  • Kremer, G.G., “Enhanced Robust Stability Analysis of Large Hydraulic Control Systems via a Bifurcation Based Procedure,” Journal of the Franklin Institute, Vol. 338, No. 7, November 2001, pg. 781-809.
  • Kremer, G.G. and Thompson, D.F., “A Bifurcation Based Procedure for Designing and Analyzing Robustly Stable Nonlinear Hydraulic Servo Systems,” Proceedings of the Institute of Mechanical Engineers, (Vol 212 Part I), 1998, pp. 383-394.

Awards:

  • Carnegie Scholar (2005); Robe Professor (2012); Russ College Outstanding Undergraduate Teaching Award (2010); Ohio University Outstanding Student Organization Advisor Award (2000); Ability One National Design Competition (multiple awards won by student teams I have mentored)

Something you may not know about me: Kremer loves to experience nature on foot or on a mountain bike. He has competed in 6 marathons, numerous 100 mile mountain bike races, and other endurance and adventure races. He's also very active in his church community.

Technical Report (1)

  • Mitchell, G., Sargand, S., Stuart, B., Russ, A., Steinberg, E., Kremer, G., Vassiliadis, C. (2010). Al Anbar University ABET Accreditation Services Project- Phase I and Phase II Report. U S Army Corps of Engineers; 185 Pages.

Conference Proceeding (16)

  • Kremer, G. (2013). It’s all about relationship - expanding relational learning opportunities. Washington, DC: American Society for Engineering Education.
  • Kremer, G. (2013). Talkin' Teams – Strategies for Elevating Student and Team Skill Development over Project Completion. Washington, DC: American Society for Engineering Education.
  • Stuart, B., Bayless, D., Kremer, G., Vis-Chiasson, M., Riefler, G. (2009). Carbon Recycling Via Membrane-Based Photobioreactor. Santa Clara, CA: Institute of Biological Engineering 2009 Annual Conference.
  • Kremer, G., Ryan, T., Switzer, S. (2008). A Risk Assessment Method and Safety Plan for a University Research Lab. Proceedings of International Mechanical Engineering Congress and Exposition 2008.
  • Wallace, S., Kremer, G. (2008). Diesel Engine Energy Balance Study Operating On Diesel And Biodiesel Fuels. Proceedings of International Mechanical Engineering Congress and Exposition 2008.
  • Cyders, T., Kremer, G. (2008). Engineering Around the World: Driving Local Economics in Africa With Human Power. Proceedings of International Mechanical Engineering Congress and Exposition 2008.
  • Kremer, G. (2008). Risk Assessment of a Mechanical Engineering Department. Proceedings of the 2008 American Society for Engineering Education Annual Conference & Exposition; Paper 1040, Session 3266.
  • Kremer, G., Burnette, D. (2008). Using Performance Reviews In Capstone Design Courses For Development And Assessment Of Professional Skills. Proceedings of the 2008 American Society for Engineering Education Annual Conference & Exposition; Paper 1041, Session 3525.
  • Kremer, G., Burnette, D. (2008). Using Performance Reviews In Capstone Design Courses For Development And Assessment Of Professional Skills. Paper 1041. Pittsburgh, PA: ASEE 2008 Annual Conference & Exobition; Session 3525: 13.1349.1 - 13.1349.11. http://peer.asee.org/3640.
  • Kremer, G. (2007). Lessons Learned from Developing, Implementing and Evaluating an Integrated Departmental Assessment and Continuous Improvement Process. ABET Best Assessment Processes IX Symposium.
  • Leal, W., Kremer, G. (2006). Design and Verification of a Safety Monitoring and Control System for a Fuel Cell Laboratory. Clearwater Coal Conference.
  • Kremer, G. (2006). An Academic Integrity Case Study: Let's Talk About It. The 26th Annual Lilly Conference on College Teaching; #157.
  • Fisher, M., Kremer, G. (2006). Value-ing the Professions: Integrating Values in the Education of Science and Engineering Professionals. The 26th Annual Lilly Conference on College Teaching; #162.
  • Bayless, D., Kremer, G., Vis-Chiasson, M., Stuart, B., Prudich, M., Cooksey, J., Muhs, J. (2004). Enhanced Practical Photosynthetic CO2 Mitigation. Alexandria, VA: Third Annual Conference on Carbon Sequestration.
  • Halliday, K., Kremer, G., Urieli, I. (2001). Putting the Engine Back into Engineering Education – A Capstone Design Project. Proceedings of the 2001 American Society for Engineering Education Annual Conference & Exposition, Session 2525.
  • Bayless, D., Kremer, G., Vis-Chiasson, M., Stuart, B., Prudich, M., Cooksey, K., Muhs, J. (2001). Enhanced Practical Photosynthetic CO2 Mitigation. Delaware, OH and Washington, DC: First Ohio Carbon Dioxide Reduction, Sequestration, and Capture Forum, First National Conference on Carbon Sequestration.

Book, Chapter in Scholarly Book (1)

  • Kremer, G. (2013). Designing to Make A Difference: Authentic Integration of Professional Skills in an Engineering Capstone Design Course. Bloomington, IN: Indiana University Press; 40-52.

Journal Article, Academic Journal (7)

  • Burnette, D., Kremer, G., Bayless, D. (2008). The Use of Hydrogen-depleted Coal Syngas in Solid Oxide Fuel Cells. Journal of Power Sources ; 182: 329-333.
  • Burnette, D., Kremer, G., Bayless, D. (2008). The use of hydrogen-depleted coal syngas in solid oxide fuel cells. 1. Journal of Power Sources; 182: 329–333.
  • Shi, L., Bayless, D., Kremer, G., Stuart, B. (2007). Numerical Investigation of the Flow Patterns in an Electrically Enhanced Cyclone. 4. Journal of the Air and Waste Management Association ; 57: 489-496.
  • Shi, L., Bayless, D., Kremer, G., Stuart, B. (2006). CFD Simulation of the Influence of Temperature and Pressure on the Flow Pattern in Cyclones. 22. Industrial & Engineering Chemistry Research; 45: 7667-7672.
  • Bayless, D., Kremer, G., Vis-Chiasson, M., Stuart, B., Shi, L. (2006). Photosynthetic CO2 Mitigation Using a Novel Membrane-Based Photobioreactor. 4. Journal of Environmental Engineering and Management; 16: 209-215.
  • Bayless, D., Kremer, G., Vis-Chiasson, M., Stuart, B., Shi, L., Cuello, J., Ono, E. (2006). Photosynthetic CO2 Mitigation using a Novel Membrane-based Photobioreactor. 4. Journal of Environmental Engineering and Management; 16: 209-215.
  • Bayless, D., Shi, L., Kremer, G., Stuart, B., Reynolds, J., Caine, J. (2005). Membrane-Based Wet Electrostatic Precipitation. 6. Journal of the Air & Waste Management Association; 55: 784-791.

Patents

  • Kremer, G., Switzer, S., Vis-Chiasson, M., Bayless, D., Stuart, B. Flow Controlling Header. 8703478 .
  • Bayless, D., Vis-Chiasson, M., Kremer, G., Stuart, B. Apparatus and Method for Growing Biological Organisms for Fuel and Other Uses. 60/799,440.
  • Bayless, D., Vis-Chiasson, M., Kremer, G. Enhanced Practical Photosynthetic CO2 Mitigation. 6,667,171.