Skip to: Main Content Search Navigation Secondary Navigation

Hajrudin Pasic

Professor and Graduate Chairman
Mechanical Engineering
STKR 261
pasic@ohio.edu
Phone: 740.593.9471

Before joining Ohio University in 1984 as a Stocker Visiting Professor, Dr. Pasic worked for the University of Sarajevo and in the meantime in 1989-1990 worked at the European Union Research Center in Ispra, Italy. Dr. Pasic has been active in applied mechanics and in electrostatic precipitation. He has four patents, one of which has a revenue-generating license.


Research Interests: Applied Math, Design, Mechanics, Pollution Control

All Degrees Earned: Ph.D., Applied Mechanics, Stanford University, 1979. M.S., Applied Mechanics, Stanford University, 1977. M.S., Applied Mechanics, University of Belgrade, 1976. B.S., Mechanical Engineering, University of Sarajevo, 1968.

Journal Article, Academic Journal (2)

  • Telenta, M., Pasic, H., Alam, K. Aerosol Modeling and Pressure Drop Simulation in a Sieving. Southampton: Computational Methods in Multiphase Flow IV, WITPress; 3-8.
  • Bayless, D., Pasic, H., Alam, K., Shi, L., Haynes, B., Cochran, J., Kahn, W. Use of Membrane Collectors in Electrostatic Precipitators. Journal of the Air and Waste Management Association; 51: 1401-1407.

Conference Proceeding (13)

  • Pasic, H., Alam, K., Garg, D. Dynamics of a Cantilever Electrode Beam on a Vibrating Base. ASME Proceedings of the IMECE 2009.
  • Pasic, H., Khan, Z. Sieving Electrostatic Precipitator: An Innovative Pollution Control Device. St. Louis, Missouri: 2006 NSF Design, Service and Manufacturing Grantees and Research Conference.
  • Ali, M., Pasic, H., Alam, K. Cross-Flow Wet Precipitator. Pittsburgh, PA: 2015 International Pittsburgh Coal Conference ; http://www.engineering.pitt.edu/pcc/.
  • Alam, K., Pasic, H., Klein, P. Design and Fabrication of a Nanocomposite Mold. Anchorage, AK: Eighteenth Annual International Conference on Composites.
  • Pasic, H., Khan, Z., Ridgway, D. Current Status of Development of Sieving Electrostatic Precipitator. Pittsburg, Pennsylvania: 23rd Annual International Pittsburg Coal Conference.
  • Pasic, H., Khan, Z. Laboratory-Pilot-Testing of Sieving Electrostatic Precipitator. Cairns: 10-th International Conference on Electrostatic Precipitation.
  • Pasic, H., Khan, Z., Ridgway, D. Sieving Electrostatic Precipitator. Cairns: 10th International Conference on Air Pollution Abatement Technologies, International Society for Electrostatic Precipitation (ICESP).
  • Khan, Z., Pasic, H. Sieving Electrostatic Precipitator: An Innovative Device for Pollution Control. BUET, Dhaka: 6th International Conference on Mechanical Engineering.
  • Pasic, H., , . Sieving Electrostatic Precipitator. Pittsburg, Pennsylvania: 22nd Annual International Pittsburg Coal Conference.
  • Bayless, D., Pasic, H., Alam, K. Membrane-Based Wet Electrostatic Precipitation. Proceedings of the 26th International Technical Conference on Coal Utilization & Fuel Systems; 519-530.
  • Pasic, H., Alam, K., Bayless, D. Membrane Electrostatic Precipitation. Washington, D.C.: Proceedings of the Air Quality II Conference.
  • Pasic, H., Alam, K., Bayless, D. Membrane-based Electrostatic Precipitation. Proc. Of 17th Annual International Pittsburgh Coal Conference; Paper#13-7.
  • Alam, K., Pasic, H., Anagurthi, K., Zhong, R. Determination of Surface Heat flux in Quenching. 3. Proceedings of the ASME HTD ; 364: 349-356.

Patents

  • Pasic, H. Electrostatic Sieving Precipitator. 6,878,192.
  • Pasic, H. Low Cost Composite Discharge Electrode. 2009/009787 A1.
  • Alam, K., Pasic, H., Bayless, D. Membrane Laminar Wet Electrostatic Precipitator. U.S. Patent Number 6,783,575.
  • Alam, K., Pasic, H., Bayless, D. Membrane Electrostatic Precipitator. U.S. Patent Number 6,231,643.
  • Pasic, H., Hermann, G. Method of Removing Particulate Matter from Precipitator Plate. 4,276,056.